LEB-1000 Cyclone 21,500 rpm S-Can Motor 200 g*cm torque at 12VDC

LEB-1000 Cyclone High Performance Slot Motor featuring S-Can motor - rated at 21,500 RPM / 200 g*cm torque at 12VDC.

Blow the doors off the Competition!

Experience smooth acceleration, excellent top-end speed, and responsive brakes with the Cyclone 21.5K motor. Its dual armature shaft is versatile, compatible with both can or end-bell drive setups. Featuring tapped holes for easy and secure attachment to the motor pod with M2 screws (can end). The Cyclone 21.5K is a great motor for home, club or proxy racing and delivers instant performance enhancement for Carrera, Scalextric, Fly, Ninco, NSR, Avant, and other brand 1:32 slot cars.

Note: For most cars, install the pinion gear from the original motor on to the Cyclone motor and simply snap in place. However, for some cars, including Carrera 132, it is necessary to shorten the armature shaft on the end-bell side of the motor. Cut using a Dremel tool with a cut off wheel. Leave approximately 1/8" of motor shaft. Tape over the holes on these motors while cutting.