Scaleauto Motors & Mounts

Scaleauto SC-0005 Short Can High Performance Closed Can Motor 30,000rpm. High Performance closed can motor - 30,000 RPM, 280 gr-cm torque, 420...

Scaleauto SC-0007 Universal 1/32 Mabuchi style motor 35,000rpm. SCALEAUTO Universal 1/32 Mabuchi style motor - 35,000 RPM, 190 gr-cm torque, 440...

Scaleauto SC-0008B Short Can Tech-1 Motor 20,000rpm. Dual shaft allows application in any car with standard Mabuchi type motor both in inline as well...

Scaleauto SC-0009B S-Can Tech-2 Motor 25,000rpm. Tested at 12V Size: 25x20x15mm 0,21 Amp - 225 gr x cm Double shaft Plastic endbell 2mm axle Low...

Scaleauto SC-0010B Short Can Tech-3 1/32 Mabuchi style motor - 30,000rpm, 216 gr-cm torque. Dual shaft allows application in any car with standard...

Scaleauto SC-0011C Long-Can Tech-1 Motor 21,300rpm 285 gr-cm torque. 21,300rpm tested at 12V Size: 32 x 20 x 15.3mm 0,18 Amp - 285 gr x cm 2mm...

Scaleauto SC-0012B Long Can Tech-2 Motor 25,000rpm. Tested at 12V Size: 32 x 20 x 15.3mm 0,26 Amp - 360 gr x cm Sealed endbell 2mm axle Low magnet...

Scaleauto SC-0013 High Performance TECH-3 Motor Series Motor 29,000rpm, 220 gr-cm torque, 300 milliamps max current. Applications:  Ninco NC-2 /...

Scaleauto SC-0014B Short-Can Tech-1 Motor - 20,000rpm, 205 gr-cm torque. Same size as JK Falcon, Little Ripper, Cheetah, Fox "S" Can Motors...

Scaleauto SC-0015B Short Can Tech 2 Motor 25,000rpm, 230 g-cm torque, 290 milliamps max current.  

Scaleauto SC-0016B Short-Can Tech-3 Motor 30,000rpm, 254 g-cm torque, 370 milliamps max current. 2mm plain motor shaft.

Scaleauto SC-0018B Slim-Can Tech-3 Motor 30,000rpm, 82 g-cm torque, 140 milliamps max current. Tested at 12V Size: 26.9 x 15.5 x 12mm 0,14 Amp...

Scaleauto Long-Can Sprinter-2 Motor 21,500rpm. Tested at 12V Size: 32 x 20 x 15.3mm 0,28 Amp - 300 gr x cm Sealed endbell 2mm axle High magnet effect...

Scaleauto SC-0025C Long Can Sprinter Motor 21,500rpm SCX RX41. A replacement upgrade motor for SCX cars and SRS2 cars replacing the original RX8,...

Scaleauto Long-Can Endurance Motor 22,000rpm. Tested at 12V Size: 32 x 20 x 15.3mm 0,20 Amp - 310 gr x cm Sealed endbell 2mm axle Low magnet effect 4...

Scaleauto SC-0027B Long-Can Sprinter-Junior Motor 18,000rpm, 310 gr-cm torque.

Scaleauto SC-0028 Long Can Sprinter-1 Motor 18,000rpm. Motor SC-28: 18000rpm Sprinter-1 12v - 0,22 Amp. 310 gr* cm 32.1x20.2x15.3mm Sealed endbell...

Scaleauto SC-0029 Long Can Sprinter-Junior-2 Motor 22,500rpm. Tested at 12V Size: 32 x 20 x 15.3mm 0,29 Amp - 430 gr x cm Sealed endbell 2mm axle...

Scaleauto SC-0030 Long-Can Outlaw Motor 35,000rpm with Active Cooling. 35,000rpm Tested at 12V 0,41 Amp - 400 gr x cm MPM 14.5 gr 2mm axle Size: 32...

Scaleauto SC-1625 Silicone Wire 0.9mm, 1m length, Black.

Scaleauto SC-1650 Silicone Wire 1.5mm, 1m length, Orange.

Scaleauto SC-3004B Aluminum SW Motor Mount for NSR Sidewinder "Classic" Cars (Porsche 917K, Ford GT40 Mk II, Ford GT40 MK IV, Ford P68).

Scaleauto SC-6522C RT3 Sidewinder Motor Mount offset 0.5mm Extra Hard, Red.

Scaleauto SC-6523C RT3 Inline Motor Mount Extra Hard, Red.

Scaleauto SC-6526C RT3 Sidewinder Motor Mount Offset 0.0mm Extra hard, Red. To fit S-Can motors.  

Scaleauto SC-6528C RT3 Anglewinder Motor Mount Offset 1mm - Special Wider Rear Axle Support - Extra hard, Red.

Scaleauto SC-6529A-HD Anglewinder Motor Mount Offset 0.75 ball bearing rear axle mount - Extremely Hard, Black.

Scaleauto SC-6529b Anglewinder Motor Mount RT4 GT/LMP, offset 0,75mm with Spherical Bearings - Green. AW RT4 Engine Support Offset - 0.75m GT/LMP...

Scaleauto SC-6531 Anglewinder Motor Mount RT4 GT/LMP Special Rear End Adjustable - Green. RT4 AW Adjustable Offset Motor Mount Independent Rear End...

Scaleauto SC-6531HD RT4 Anglewinder Adjustable Offset Motor Mount Independent Rear End, GT/LMP - Extremely Hard, Black.

Scaleauto SC-6532 Anglewinder Motor Mount Anglewinder Motor Mount RT4 Rally Special Rear End Adjustable - Green RT4 AW Adjustable Offset Motor Mount...

Scaleauto SC-6535C Anglewinder Motor Mount RT3 Offset 0.75mm Extra Hard - Special Wider Rear Axle Support.

Scaleauto SC-6536C RT3 Anglewinder Motor Mount Offset 0.50mm - Special Wider Rear Axle Support - Extra hard, Red

Scaleauto SC-6537C RT3 Anglewinder Motor Mount Offset 0.25mm - Special Wider Rear End  - Extra Hard, Red.

Scaleauto SC-6538 RT3 Anglewinder Motor Support Extension Set.

Scaleauto SC-6538B RT3 Inline Motor Support Extension Set.

Scaleauto SC-6539A RT4 Anglewinder Motor Extension Fixing Parts, Short.

Scaleauto SC-6539B RT4 Anglewinder Motor Extension Fixing Parts, Long.