Slot.it

Slot.it SIPT15 Zero Grip Front Tires Low Profile Slick 17-18.3 x 10mm (x4). Using Zero grip tires on front wheels reduces drag particularly when...

S1 Recommended for use with non-abrasive and clean track surfaces. 12.4mm wide Formula 1 grooved tires. Tire outside diameter with hubs: PA20: 20.8mm

Slot.it Z1 Rubber Low Profile Slick 15.1-18.1 x 8mm. Width: 8mm Tire Outsdie Diameter w/Hubs: Hub PA33:  15.1mm Hub PA17:  16.7mm Hub...

Slot.it SIPT207P6B P6B Rubber Slick 18 x 10mm, Dwg 1207 (x4).

Slot.it C1 Rubber Treaded Tires Classsic Car (x4). C1 is recommended for Ninco abrasive track or Scalextric Sport. Classic tires with tread,...

Slot.it P5 Rubber Tires F1, 20.8mm x 12.4mm (x4). Width:  12.4mm Tire Outside Diameter w/Hubs: Hub PA20:  20.8mm

Slot.it P6 Racing Slick Tires, 19mm-20.2mm x 10mm (x4). P6 suggested for use with Scalextric Sport / Carrera / Wood Routed track surfaces Width 10mm...

Slot.it P6 Rubber Tires 19.7-21mm x 11.2mm (x4). P6 suggested for use with Scalextric Sport / Carrera / Wood Routed track surfaces Width: 11.2...

Slot.it F22 Rubber Slick F1 Tires 20.4 x 12.4mm (x4). F22 compound are recomended by Slot.it for most track surfaces. Mould Number Dwg 1068 suitable...

C1 is recommended for Ninco abrasive track or Scalextric Sport. Width: 10mm Tire Outside Diameter w/Hubs: PA17: 18.8mm PA24: 18.8mm PA43:...

Slot.it C1 Rubber Slick 20.1-21.3mm x 9.5mm (x4). C1 is recommended for Ninco abrasive track or Scalextric Sport. Width: 9.5mm Tire Outside Diameter...

GT tuning kit for Ninco track, PT19 + PT1170E1 (2ea) E1 - PT1170E1 (2 ea) - Rear Width: 9.5mm Tire Outside Diameter w/ Hubs: PA33: 17.1mm PA17:...

Slot.it SISCP04F Replacement Cable for High Current Cartridge (2m).

Brass eyelets install on end of motor lead wires - they are then inserted into a Slot.It guide flag where a friction fit holds them (and the wire...

Front Axle Spacers for the Step 3 Versions of the Slot.it Chassis - These graduated thickness spacers are used to limit the front axle up / down...

Slot.it Motor Adapter for use with Mabuchi style motors such as Slot.it V12, Scale Auto SC007 SC009, SC010 and similar Mabuchi style motors - to...

Universal Lighting Kit for Analog, SSD Slot.it cars and oXigen.  Works with SISP15 chip.  

Slot.it Pro Axle System Independent Rotation Front Axle Eyelets 1.6 L5mm - 10 pcs. / package - Use with SIPA39 Axle.  

Slot.it SISP18 Tin Plaited Copper Braid 1m / 39+ inches. 1m / 39+ inches roll of tin plaited copper braid.  

Slot.it Competition Copper Braid 1m / 39+ inches roll.  

Slot.it Tungsten Ballast Motor Mount Shape 2.5g. Specially shaped ballast, in tungsten, 2.5g. Fits magnet cradle. 70% heavier than lead. To be placed...

Slot.it SISP24 Tungsten Ballast Cylinder 6.2x1mm, 3.5g (6x0.58g). 6 x 0.58gm discs of Tungsten ballast (weights) lead free, non-toxic for weight...

Slot.it Tungsten Ballast Putty Shapable, 10gms. Slot.it Tungsten Putty ballast, in polymer+tungsten, shapes easily, 10g each. 70% heavier than lead....

LMP Copper Braids Copper braid Pack of 8. These braids are 0.2mm thick, cut from the highest quality copper. The hole and braid length are specially...

Slot.it Lighting kit connectors and cables for Oxygen and SSD (Digital) chips.    

Pre-cut brass tabs for LMP pickup.  Use this part for easy and convenient assembly of standard braids in a Slot.it LMP pickup.

Slot.it SISP42 Spare Parts for Lighting Kits. Parts included: Spare LEDs, white and red. Cables, red and black. Heatshrink tubing.

Slot.it SISP44 Universal Lighting Kit with brake for Analog and Digital Slot.it. Compatible with SP15b, SP15c, SP43, O201b2 e O201c chips 1 PCB board...

Slot.it SISP45 Cable with Connectors for motors. Motor Cable with quick disconnect.  Package contains three (3) cables.  Note: The SISP45...

Slot.it SISP48 Spare Flat Cables for SP44 x2.

Slot.it SISP49 Set of Rubber Antennas (2+2).

Slot.it SISP51 Noise motor filter for V12 motors for O2/SSD/D132 in-car module.

Light Weight Aluminum dual flange rims for use with Slot.it (sponge) foam rubber tires - 13.6 diameter x 9.5mm wide with a 1.5mm deep rear hub...

Slot.it aluminum wheels Ø14.2 x 9.5 x 1.5 with M2 grub screws (x2). Aluminum wheels with sidewalls to keep the tire in place, which don't...

Slot.it aluminum wheels Ø14.3 x 8mm x 1.5mm hub, M2 grub, 1.2g (2x) 2 Aluminum wheels 14.3 x 8 x 1.5mm 2 Grub screws L3 Replaces: ...

Slot.it plastic wheels Ø14.3 x 8mm x 1.5mm hub, M2 grub, 0.59g (x4) Plastic 14.3 x 8mm wheels short hub (1.5mm) Compatible with 670B, 312 and...

Slot.it aluminum wheels Ø15 x 9.5 x 1.5mm with M2 grub screws (x2).  They are specifically designed for the Slot.it sponge tires on...

Slot.it SIW15808215-3D 3D Printed Wheels Ø15.8x8.2x1.5mm (x2).

Slot.it aluminum wheels Ø15.8 x 8.2mm x 1.5mm Hub, 1.4g (2x). 2 Aluminum wheels Ø15.8 x 8.2 x 1.5mm 2 Grub screws L3 Replaces...

Slot.it aluminum wheels 15.8x8.2 with double shoulder, 1.5 short hub, M2 grub, 1.1g (x2). Replaces:  SIPA24-ALF

Slot.it aluminium wheels 15.8x8.2, hollow double shoulder with holed channel, 1g, M2 grub (2x) Replaces SIPA24-ALH

Slot.it magnesium hollow wheels Ø15.8 x 8.2 x 1.5mm, M2 grub, 0.8g (2x) The new, lightest version of the versatile, high performance magnesium...

Slot.it Plastic wheels Ø15.8 x 8.2 x 1.5mm short hub wheels, 0.7g (4) Plastic Ø15.8 x 8.2 x 1.5mm short hub wheels M8D replacement...

Slot.it aluminum wheels ø15.8 x 8.2 x 2.5mm hub, M2 grub 1.4g (2x) Replaces SIWH1050-AL 2 aluminum wheels 15.8 x 8.2 x 2.5mm 2 grub screws L3

Slot.it magnesium wheels Ø15.8 x 8.2 x 2.5mm hub, M2 grub, 0.9g (2x) Replaces:  SIPA17-MG

Slot.it plastic wheels Ø15.8 x 8.2 x 2.5mm hub, 0.71g, grey (4x). Replaces SIPA17-PL

Slot.it aluminium wheels Ø15.8 x 10.2 x 1.5mm with double shoulder, M2 grub, 1.3g (2x). Replaces SIPA49-ALF

Slot.it aluminum wheels Ø15.8 x 10.2, hollow double shoulder with holed channel, 1.3g, M2 grub (x2). Replaces SIPA49-ALH    

Slot.it magnesium hollow wheels Ø15.8 x 10.2, xhort hub 1.5 with M2 grub screws, 0.9g (2x) 2 Magnesium hollow wheels to achieve the maxiumu...

Slot.it SIW16508215-3D 3D Printed Wheels Ø16.5x8.2x1.5mm (x2).